SOLAR FRIENDLY

DSP-6LP Microdetector

Our low power detector has been re-designed to be used on any voltage and either polarity from 10 to 30 Volts AC or DC. This low power vehicle detector is perfect for solar powered gate installations.
This detector beats all competition for current consumption. Works on all gate and access control applications that require extremely low current draw from a solar powered gate installation.
The 6LP detector is " fail-secure", and should be used on free exit loops.

SOLAR FRIENDLY

DSP-7LP Microdetector

Our low power workhorse, the DSP-7LP, has set a new standard for access and parking detectors. This vehicle detector is available with a NO and a NC relay output. And of course, it works on any voltage between 10 and 30 volts - AC or DC!!!
The DSP-7LP vehicle detector has been specifically designed to handle gates, parking, drive-through and other access control applications.
The 7LP detector is "fail-safe", and should be used on all safety loops.

DOWNLOAD DETAILED SPECIFICATIONS

SOLAR FRIENDLY

DSP-7 Microdetector

This vehicle detector is available with a NO and a NC relay output. And of course, it works on any voltage between 10 and 30 volts - AC or DC!!!
The DSP-7 vehicle detector has been specifically designed to handle gates, parking, drive-through and other access control applications.
The DSP-7 detector is "fail-safe", and should be used on all safety loops.

DOWNLOAD DETAILED SPECIFICATIONS

Super Small -
Only 1.3" x 1.3" x 2"

DSP-11 Microdetector

Diablo Controls has been listening! We now offer a complete line of simple, switchless, single output vehicle detectors available with the industry standard 11-pin base.
Three models for your complete 11-pin vehicle detector needs:
The DSP-11- LV which will operate on any voltage from 10 to 30 volts - AC or DC.
Use the DSP-11- 117 for 117 VAC or the DSP-11- 230 for 230 VAC.

DOWNLOAD DETAILED SPECIFICATIONS

Fits Sentex, Elite and new
B&B operators!

DSP- 40S
Plug-in

A plug-in detector which now has 4 levels of sensitivity.
The DSP-40S detector will add a new dimension of simplicity to your plug-in detector requirements.
This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "Detect" and the "Fail" outputs.

DOWNLOAD DETAILED SPECIFICATIONS

Fits Sentex, Elite, Viking and
the All-O-Matic operators!

DSP- 50
Plug-in

A plug-in detector which now has 9 levels of sensitivity and duel relays.
The DSP-50S detector will add a new dimension of simplicity to your plug-in detector requirements as it can operate as a loop detector but with the flip of a switch it can operate our probe in pulse mode.
This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "A and B relayl" outputs.

DOWNLOAD DETAILED SPECIFICATIONS

DSP-50

Probe Kit

This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The advantage to using the DSP-50 detector with the probe is that the detector can also be used for a loop detector with the flip of a switch. It also offers the ability of setting sensitivity.

This detector operates between 10 and 30 volts AC or DC.

DOWNLOAD DETAILED SPECIFICATIONS

DML- 9LP

Probe Kit

This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The DML-9LP is a plug and play device and requires no settings. It also operates as a low current draw device and runs on 10 to 30 volts AC or DC.

DOWNLOAD DETAILED SPECIFICATIONS

DSP-22-1 Single Channel Detector for the DoorKing® Operator

Another switchless single-channel vehicle detector product designed to work with the DoorKing operators.

DOWNLOAD DETAILED SPECIFICATIONS

DSP-22-2 Two Channel Detector for the DoorKing® Operator

Another switchless two-channel vehicle detector product designed to work with the DoorKing operators.
This detector is available with a solid state presence output on channel 1 and a N.O. and a N.C. relay output on channel 2.
The channel 2 detector also has a switch to operate in either the pulse or presence mode.

DOWNLOAD DETAILED SPECIFICATIONS

DSP-15 Parking/Access Control Detector

The DSP-15 vehicle detector is a PCB version of the DSP-10.
This detector is available in either 12 or 24 VDC versions and can be ordered with the terminal board connector option or a removable connector and harness.

DOWNLOAD DETAILED SPECIFICATIONS

The DSP-10 is available in 3 models.

DSP-10-LV (10 to 30 Volts AC or DC)
DSP-10-117 (85 to 125 VAC)
DSP-10-230 (180 to 250 VAC)

DSP-10 Parking Detector

The DSP-10 (11 Pin Base) vehicle detector has been designed to handle all access control, drive-through, and parking, applications. It can be used on entrance loops, safety loops, or free exit loops. With dual relay outputs, extension, delay, pulse on exit or entrance and the flexibility to be either "fail safe" or "fail secure," it is the only parking detector you will ever need.

DOWNLOAD DETAILED SPECIFICATIONS

565 Dakota Street, Unit F
Crystal Lake, Illinois 60012
866.395.6677
Fax: 815-459-4633
info@diablocontrols.com
www.diablocontrols.com

DSP 50/40 Card Rack

DOWNLOAD DETAILED SPECIFICATIONS

SOLAR FRIENDLY	DSP-6LP Microdetector Our low power detector has been re-designed to be used on any voltage and either polarity from 10 to 30 Volts AC or DC. This low power vehicle detector is perfect for solar powered gate installations. This detector beats all competition for current consumption. Works on all gate and access control applications that require extremely low current draw from a solar powered gate installation. The 6LP detector is " fail-secure", and should be used on free exit loops. DOWNLOAD DETAILED SPECIFICATIONS	SOLAR FRIENDLY	DSP-7LP Microdetector Our low power workhorse, the DSP-7LP, has set a new standard for access and parking detectors. This vehicle detector is available with a NO and a NC relay output. And of course, it works on any voltage between 10 and 30 volts - AC or DC!!! The DSP-7LP vehicle detector has been specifically designed to handle gates, parking, drive-through and other access control applications. The 7LP detector is "fail-safe", and should be used on all safety loops. DOWNLOAD DETAILED SPECIFICATIONS
SOLAR FRIENDLY	DSP-7 Microdetector This vehicle detector is available with a NO and a NC relay output. And of course, it works on any voltage between 10 and 30 volts - AC or DC!!! The DSP-7 vehicle detector has been specifically designed to handle gates, parking, drive-through and other access control applications. The DSP-7 detector is "fail-safe", and should be used on all safety loops. DOWNLOAD DETAILED SPECIFICATIONS	Super Small - Only 1.3" x 1.3" x 2"	DSP-11 Microdetector Diablo Controls has been listening! We now offer a complete line of simple, switchless, single output vehicle detectors available with the industry standard 11-pin base. Three models for your complete 11-pin vehicle detector needs: The DSP-11- LV which will operate on any voltage from 10 to 30 volts - AC or DC. Use the DSP-11- 117 for 117 VAC or the DSP-11- 230 for 230 VAC. DOWNLOAD DETAILED SPECIFICATIONS
Fits Sentex, Elite and new B&B operators!	DSP- 40S Plug-in A plug-in detector which now has 4 levels of sensitivity. The DSP-40S detector will add a new dimension of simplicity to your plug-in detector requirements. This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "Detect" and the "Fail" outputs. DOWNLOAD DETAILED SPECIFICATIONS	Fits Sentex, Elite, Viking and the All-O-Matic operators!	DSP- 50 Plug-in A plug-in detector which now has 9 levels of sensitivity and duel relays. The DSP-50S detector will add a new dimension of simplicity to your plug-in detector requirements as it can operate as a loop detector but with the flip of a switch it can operate our probe in pulse mode. This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "A and B relayl" outputs. DOWNLOAD DETAILED SPECIFICATIONS
	DSP-50 Probe Kit This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The advantage to using the DSP-50 detector with the probe is that the detector can also be used for a loop detector with the flip of a switch. It also offers the ability of setting sensitivity. This detector operates between 10 and 30 volts AC or DC. DOWNLOAD DETAILED SPECIFICATIONS		DML- 9LP Probe Kit This probe kit, as with all of our probe/mini-loop kits work as "free exit - pulse only devises". The DML-9LP is a plug and play device and requires no settings. It also operates as a low current draw device and runs on 10 to 30 volts AC or DC. DOWNLOAD DETAILED SPECIFICATIONS
	DSP-22-1 Single Channel Detector for the DoorKing® Operator Another switchless single-channel vehicle detector product designed to work with the DoorKing operators. DOWNLOAD DETAILED SPECIFICATIONS		DSP-22-2 Two Channel Detector for the DoorKing® Operator Another switchless two-channel vehicle detector product designed to work with the DoorKing operators. This detector is available with a solid state presence output on channel 1 and a N.O. and a N.C. relay output on channel 2. The channel 2 detector also has a switch to operate in either the pulse or presence mode. DOWNLOAD DETAILED SPECIFICATIONS
	DSP-15 Parking/Access Control Detector The DSP-15 vehicle detector is a PCB version of the DSP-10. This detector is available in either 12 or 24 VDC versions and can be ordered with the terminal board connector option or a removable connector and harness. DOWNLOAD DETAILED SPECIFICATIONS	The DSP-10 is available in 3 models. DSP-10-LV (10 to 30 Volts AC or DC) DSP-10-117 (85 to 125 VAC) DSP-10-230 (180 to 250 VAC)	DSP-10 Parking Detector The DSP-10 (11 Pin Base) vehicle detector has been designed to handle all access control, drive-through, and parking, applications. It can be used on entrance loops, safety loops, or free exit loops. With dual relay outputs, extension, delay, pulse on exit or entrance and the flexibility to be either "fail safe" or "fail secure," it is the only parking detector you will ever need. DOWNLOAD DETAILED SPECIFICATIONS
565 Dakota Street, Unit F Crystal Lake, Illinois 60012 866.395.6677 Fax: 815-459-4633 info@diablocontrols.com www.diablocontrols.com			DSP 50/40 Card Rack DOWNLOAD DETAILED SPECIFICATIONS