|
Diablo Controls, Inc.
|
|
Diablo Controls, Inc.
|
 |
Are you still using old detectors with old ideas and old switches ?
Diablo Controls has patented a system that eliminates frequency switches.
United States Patent Number: 7,132, 959
|
SOLAR FRIENDLY
|
DSP-6LP Microdetector Our low power detector has been re-designed to be used on any voltage and either polarity from 10 to 30 Volts AC or DC. This low power vehicle detector is perfect for solar powered gate installations. This detector beats all competition for current consumption. Works on all gate and access control applications that require extremely low current draw from a solar powered gate installation. The 6LP detector is " fail-secure", and should be used on free exit loops.
|
 SOLAR FRIENDLY
|
DSP-7LP Microdetector Our low power workhorse, the DSP-7LP, has set a new standard for access and parking detectors. This vehicle detector is available with a NO and a NC relay output. And of course, it works on any voltage between 7 and 30 volts - AC OR DC!!!
The DSP-7LP vehicle detector has been specifically designed to handle gates, parking, drive-through and other access control applications. The 7LP detector is "fail-safe", and should be used on all safety loops.
|
 Super Small - Only 1.3" x 1.3" x 2"
|
DSP-11 Microdetector Diablo Controls has been listening! We now offer a complete line of simple, switchless, single output vehicle detectors available with the industry standard 11-pin base.
Three models for your complete 11-pin vehicle detector needs: The DSP-11- LV which will operate on any voltage from 10 to 30 volts - AC or DC. Use the DSP-11- 117 for 117 VAC or the DSP-11- 230 for 230 VAC.
|
Fits Sentex, Elite and
new B&B operators!
|
DSP- 40S Plug-in A plug-in detector which now has 4 levels of sensitivity. The DSP-40S detector will add a new dimension of simplicity to your plug-in detector requirements. This detector has been specifically designed to handle parking, drive-through and access control applications where solid-state outputs are required for both the "Detect" and the "Fail" outputs. |
|
|
DSP-10 Parking Detector The DSP-10 (11 Pin Base) vehicle detector has been designed to handle all access control, drive-through, and parking, applications. It can be used on entrance loops, safety loops, or free exit loops. With dual relay outputs, extension, delay, pulse on exit or entrance and the flexibility to be either "fail safe" or "fail secure," it is the only parking detector you will ever need.
The DSP-10 is available in 3 models. DSP-10-LV (10 to 30 Volts AC or DC)
DSP-10-117 (85 to 125 VAC)
DSP-10-230 (180 to 250 VAC)
|
 |
DSP-22 Two Channel Detector for the DoorKing® Operator Another switchless two-channel vehicle detector product designed to work with the DoorKing operators.
This detector is available with a solid state presence output on channel 1 and a N.O. and a N.C. relay output on channel 2.
The channel 2 detector also has a switch to operate in either the pulse or presence mode.
|
|
|
DSP-15 Parking/Access Control Detector The DSP-15 vehicle detector is a PCB version of the DSP-10. This detector is available in either 12 or 24 VDC versions and can be ordered with the terminal board connector option or a removable connector and harness. |
OEM Products Diablo Controls is available to design and produce detection and control products for your specific needs. |
|
|
For Sales Information:
sales@diablocontrols.com
For Orders, or Tecnical Help, call toll free:
(866) 395-6677
Fax: (815) 455-7591
|
 |
 |
 |
 |
 |
 |
 |
