The DSP-10 is intended to be an ‘all-in-one’ vehicle detector designed for the parking, drive-through, and access control industries.

The DSP-10 was designed for systems that need reliable vehicle detection.  This detector is designed to operate utilizing a single inductive loop typical in these industries.  the small packaging comes without sacrificing performance.

Designed to retrofit into existing locations that may require a detector upgrade.  Sophisticated noise filtering algorithms offer stable operation in noisy or troublesome installations.

Ordering Information:
DSP-10-LV =  10 to 30 volts AC or DC
DSP-10-117 = 117 volts AC
DSP-10-230 = 230 volts AC

Ordering Information

Click here for details ▼


  • Plug and play
  • Works on any in-ground inductive loop from 20 to 2000 microhenries
  • Can be easily changed to fail safe or fail secure mode in the field.
  • Advanced filtering technology for superior noise tolerance.
  • The DSP-10-LV is protected from damage if plugged into a higher voltage.  No need to change a fuse or reset a circuit breaker, simply plug the detector into the proper voltage and it works.
  • Separate Power/Fail and Detect LEDs.
  • Compact size with industry standard 11-pin connector in a small plastic case

Application Notes

Click here for details ▼

With its compact size, front panel switch features, and built-in fail-safe or fail-secure operation for the A output, the DSP-10 is the only vehicle detector you will ever need.

The DSP-10 provides many advanced features to provide a great value for your money.

  • Extended Presence provides vehicle detection times of many hours for those unique installations.
  • Delay for those situations where vehicles may be detected by the loop that will not be stopping at the
  • gate/door.
  • Extension for those times when you just need a little more time for the vehicle to travel through the gate/door area.
  • Loop Fail output provides a way to detect and annunciate a loop failure.
  • Sensitivity Boost for those installations that require reliable detection of semi-truck trailers and high bed vehicles.
  • Pulse on Entry or Pulse on Exit for those operators that require this type of signal.


Click here for details ▼

DSP-10 Quick Reference


Instructions & Specs